Fitting The Atkinson Tanktop
Installing the Tanktop
Please read these clear instructions for fitting your Atkinson Tanktop, Top Off Take Valve.Steel Tank:
With the back nut still on, dress the Tanktop 1” BSP thread...
Atkinson Tankmaster Fitting Instructions
The TANKMASTER is supplied for connecting to 10mm dia oil line. See Note 2 below if other pipe sizes are to be fitted. THE TANK SHOULD BE INSTALLED WITH AT...
Atkinson Tank alarm Series – Combined Bund & Overfill Alarm
Model No TA1055: 9v BatteryOverfill/Bund Alarm
Installation
ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN. 1) Install the probe into the tank as illustrated below. You will require...
Atkinson Tank alarm Series – 9v Battery Bund Alarm
Model No TA1050: 9v Battery Bund Alarm
Installation
ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN. 1) Install the probe into the tank as illustrated below. You...Atkinson Tank alarm Series – 230v 50Hz Mains Overfill Alarm
Model No TA1020: Mains Overfill Alarm
Installation
ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN. 1) Install the probe into the tank as illustrated below. You will...Atkinson Tank Alarm Series – 9v Battery Overfill Alarm
ATKINSON EQUIPMENT LTD.
Model No TA1010: 9v PP3 Battery Overfill Alarm
Installation
ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN. 1) Install the probe into the tank as illustrated...
Fitting The Atkinson Filstop Overfill Prevention Valve (GV4300)
Filstop Valve GV4300
Technical Specification
Min Flow: 50 litre/min Max Flow: 580 litre/min Min Pressure: 0.15 PSI (10 mbar) Max Pressure: 100 PSI (7 bar)Installation
1) Take out and assembly T Bar...Fitting The Atkinson Overfill Prevention Valve (GV4000)
Filstop Valve GV4000
Technical Specification
Min Flow: 50 litre/min The Atkinson Filstop...
