Pedrollo PKS65 Self Priming Peripheral Impeller Transfer pump for Diesel & Water

Description

PEDROLLO PKS65 SELF PRIMING PERIPHERAL IMPELLER PUMP FOR DIESEL & WATER 

Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made. As a result of their compactness, reliability and the fact that they are easy to use, they are suitable for use in domestic applications such as the distribution of water in combination with small pressure sets, for the irrigation of gardens and allotments, for drawing water from tanks and for all those other situations where air or water may be present in the water to be pumped.

The pump comes complete with a flap-check valve. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

PERFORMANCE RANGE

• Flow rate up to 50 l/min (3,0 m³/h)
• Head up to 70 m

SPECIFICATIONS

• Temperature (min/max) -10 °C to +90 °C
• Ambient temperature (max) +40 °C
• Manometric suction lift up to 9m
• Max. working pressure – 7 bar
• Continuous service S1

STRUCTURAL CHARACTERISTICS FOR PEDROLLO PKS65 SELF PRIMING PERIPHERAL IMPELLER PUMP

• Cast iron PUMP BODY, with UNI ISO 228/1 gas threaded suction and delivery ports
• CHECK VALVE, built into the suction port
• Aluminum MOTOR BRACKET with brass insert (patented), reducing difficulties when starting the pump after long periods without use, due to the impeller sticking
• BRASS IMPELLER, with radial peripheral blades, floating on the shaft
• AISI 416 stainless steel MOTOR SHAFT.
• Carbon/Ceramic MECHANICAL SEAL
• MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor of suitable size, which is quiet running, closed and externally ventilated, with <IM B3> structural shape, suitable for continuous duty. INSULATION class B.
• A thermal cutout device (motor protector) is incorporated in single phase motors.
• Three phase motors require an adequate external motor protector, connected according to current standards
• PROTECTION IP 44.
• CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)
• REGISTERED MODEL

If you are looking for a particular Pedrollo pump please see the branded section listing all the Pedrollo pumps we offer here – Pedrollo diesel & Water pumps

Additional information

DATASHEET