Atkinson Tankmaster 3/8″ x 15mm Compression Fitting

Description

Tankmaster 3/8″ x 15mm Compression Fittings

ATKINSON TANKMASTER VALVE 4-IN-1 SIGHT GAUGE

The Atkinson Tankmaster valve has been the industry standard fuel storage tank contents gauge for over 60 years. British engineering at its best, we support the valve with the complete range of spares so you can rely on the fact that its fully serviceable. With simple operational functions that has made the valve an firm favourite for an installation engineer and homeowner alike. The pull to read button to get your fuel level is straight forward and relies on fluid physics and not electronic parts like most contents gauges nowadays. A fully replaceable filter to ensure that only clean fuel reaches your boiler. The gauge also acts as an isolation valve when things need to be serviced.

1. Control Valve to turn on/off oil supply;
2. Pull to Read Valve/Sight Tube allows inspection of tank contents level;
3. Integral Filter to ensure only clean oil is allowed to pass from the tank;
4. Self-Closing Hand Wheel isolates oil supply in case of fire near the tank.

This product is required if the existing fitting, which is suitable for 10mm copper pipe, needs to be changed to fit 15mm copper pipe. Suitable for the Tankmaster Mark I and Mark II.

Tip: Under normal circumstances, 15mm copper pipe should only ever be used if the flow of oil through this pipe is under constant gravity pressure and never when it is acting under suction.

In Addition to the Tankmaster 3/8″ x 15mm Compression Fittings we also supply the complete range of Tankmaster Valve spares here.

Additional information