Tankmaster Valve Nut 3/8 Inch BSP + Olive

Description

Tankmaster Valve Nut 3/8″ BSP & Olive (To suit pipework)

Suitable for use with both the Mark I and Mark II Tankmaster (the only difference between these is the depth of the filter bowl).

Note: Use the 3/8″ Olive on old 3/8″ oil pipe and the 10mm Olive on modern 10mm pipe.

ATKINSON TANKMASTER VALVE 4-IN-1 SIGHT GAUGE

The Atkinson Tankmaster valve has been the industry standard fuel storage tank contents gauge for over 60 years. British engineering at its best, we support the valve with the complete range of spares so you can rely on the fact that its fully serviceable. With simple operational functions that has made the valve an firm favourite for an installation engineer and homeowner alike. The pull to read button to get your fuel level is straight forward and relies on fluid physics and not electronic parts like most contents gauges nowadays. A fully replaceable filter to ensure that only clean fuel reaches your boiler. The gauge also acts as an isolation valve when things need to be serviced.

1. Control Valve to turn on/off oil supply;
2. Pull to Read Valve/Sight Tube allows inspection of tank contents level;
3. Integral Filter to ensure only clean oil is allowed to pass from the tank;
4. Self-Closing Hand Wheel isolates oil supply in case of fire near the tank.

In addition to the Tankmaster Valve Nut all Tankmaster Spares are available here – Tankmaster Valve Spares

Additional information