Rotary Hand Pump for Oil & Diesel

Description

Rotary Hand Pump for Oil & Diesel

A light duty Rotary Pump for use with diesel fuel. kerosene and lightweight or medium weight oils up to SAE90 . The pump is self lubricating and is  supplied complete with a 3 piece suction pipe to fit into a barrel including a inlet filter gauze to block particles and sludge also complete with a 2″ BSP male barrel screw coupling. Approx. flow rate of 60 revs /18lpm – Approximately 1 litre every 3 revolutions. Made by Pressol

Technical data

• Delivery Rate L/Rev = 0.3Litres
• Delivery Rate @ 60 rotations/min pumping diesel = 18litres
• Pumping Media = Self-lubricating and non-aggressive media: fuel oil, diesel, petroleum, coolant fluid (undiluted); machine maintenance: hydraulic oil, cutting fluid, gear oil, oils up to SAE 90
• Usage = Containers/drums 60/200/220litres
• Application = For filling measuring vessels, storage cans, cannisters & machines.
• Discharge Spout
• Suction pipe = 3 length suction pipe 355 – 955mm
• Barrel screw coupling = G 2″ Male
• Pump Housing Material = Impact resistant Zinc Die Casting ZL410
• Weight = 2.371kilo’s

Product Key Features

• 0.3litres per revolutions
• Smooth hand operation
• Pump continuously positional in 360 degrees
• Deep dive suction tube with flexible length 355 to 955mm
• Assembly, commissioning and container change without tools
• CNC machined, thus optimum pump efficiency
• All connections sealed trough gaskets and O-rings
• Completely dismountable – easy to clean
• Warranty 3 years when using the supplied suction basket (excluding wear parts)

Product dimensions

L x W x H (mm) = 390x245x125

Packaged weight (kg) = 2.838

As well as this hand pump for oil & diesel we can supply some more robust models design for permanent use such as the GPI HP-100 lever hand pump or the GPI RP-10 rotary hand pump.

Additional information

P-12-055 SPECIFICATION SHEET