Combined Overfill and Bund Alarm for Tanks

Description

COMBINED BUND & OVERFILL TANK ALARM

Battery or mains powered versions available

Simple operating principle; A float switch is suspended inside the tank, just off of the bund floor. The other float switch is positioned at the level you want to set as a maximum level. These are factory attached to the alarm with a cable of 2m in length. In the event of the bund starting to fill with fluid, when the float is raised by the fluid this will cause an audible alarm to sound. The alarm can be silenced whilst the offending rise in liquid is being investigated and corrected. The overfill float switch acts in the same manner should the high level get reached during the filling of the tank.

Battery version is available for fitting to a tank where mains power is not accessible, with these versions you would need to add it to a maintenance schedule to check that the battery is still working. There is a test facility on the alarm for this purpose.

In addition to this Combined Bund & Overfill Alarm for Fuel Storage Tanks we also offer the bund only alarm as an individual unit and also the overfill alarm as an individual unit.

Bund Alarm For Fuel Tanks

Overfill Alarm for Fuel Tanks

We have had customers that have re-purposed this combined alarm set to monitor high and low levels of fuel in the main tank, thus giving an alarm when your fuel level gets low and giving an audible alarm to order more fuel.

Additional information

FITTING INSTRUCTIONS