Remote Offset Fill Point Kit

Description

REMOTE OFFSET FILL POINT KIT

Complete kit required for installing a remote offset fill point for your heating oil tank. 25% off individual component prices when bought as a kit!

KIT INCLUDES:

OFFSET FILL POINT ASSEMBLY – You need to select either 2″ threaded connection or 2″ hose tail connection. Comprises a non-return valve; ball valve; mounting bracket; elbow; polypropylene cap with chain; and appropriate 2″ connector. All joints are made and tested for leaks here in Westbury, UK.

OVERFILL PREVENTION VALVE – You need to select Steel or Plastic tank. Designed to act as the fill point on both metal and plastic diesel tanks. The Filstop physically closes the inlet to the tank should the fuel level reach its maximum during delivery. This prevents the tank from being overfilled or bursting and hence reduces the risk of pollution and expensive clean up operation that might arise from such an occurrence.

OVERFILL ALARM – You have an option for either 9v DC battery operated alarm or 230V mains operated alarm. Simple operating principle; A floating switch is suspended inside the top of the tank, this is factory attached to the alarm with a cable of 2m in length. Once the level in the tank reaches the switch and causes it to float, an alarm will sound. The alarm is silenced with a “reset” button, this will prevent the alarm from sounding again until the fluid level has dropped, deactivating the floating switch.

The individual products can be found by following the links below, but to apply the discount you will need to purchase from this page:

Remote Offset Fill Point

Overfill Alarm

Overfill Prevention Valve

Additional information

SPECIFICATION SHEET – DOWNLOAD HERE ▼