GPI FM Approved Remote Kit Assembly for All Q9 Meters
FEATURES OF THE GPI FM APPROVED REMOTE KIT ASSEMBLY:
- Maintains FM Approval
- Accommodates fluid temps from -40° F to +250° F (-40° C to +121° C) depending on meter
- This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter
- Battery powered from meter; no additional power required
£263.94 £316.73
- Description
- Additional information
- Reviews (0)
- Technical Downloads
Description
GPI FM Approved Remote Kit – Q9 Computers
The Factory Mutual (FM) Approved Remote Kit Assembly modifies FLOMEC® electronic digital meters for applications in specialized situations including remote indication and high or low fluid temperature metering applications. This kit provides the versatility of panel mounting of the LCD readout up to 100 feet (30 meters) from the turbine. This kit consists of a sensor module, a dust cover assembly, and 10 feet (3 meters) of cable. Requires a complete meter with a Q9 display.
NOTE: To maintain the Factory Mutual Approval of this kit it must be installed in accordance with the instructions given in the owner’s manual. It must also be used with a FLOMEC Factory Mutual Approved meter. When the installation is complete, the Factory Mutual decal should appear on the turbine, sensor, and dustcover. Installing this kit onto a non-FM-approved meter assembly will not make the assembly FM Approved.
NOTE: To retain Factory Mutual Approval of this kit, use only Belden Cable #9501, 2 wire shielded available here – 100ft 24 AWG 2 Conductor Wire Cable.
| SPECIFICATIONS | |
|---|---|
| Magnetic Pickup: | 1.3k Ohm, 90mH |
| Signal Type: | Sine Wave |
| Voltage: | Peak to Peak, 10 mV to 500 mV |
| Frequency: | 11 to 608 Hz |
| Cable: | 10 ft. (3 m), 2-conductor shielded, Belden #9501 |
- Maintains FM Approval
- Accommodates fluid temperatures from -40°F to +250°F (-40°C to +121°C) depending on meter
- This kit can upgrade an existing FLOMEC meter (with Q9 display) or can be purchased with a new meter
- Battery-powered display, no additional power required
- Use with the A1, G2, TM, and 03 Series meters
As well as the GPI FM Approved Remote Kit for Q9 Computers we offer many other spares and accessories for GPI and Flomec Products. GPI Fuelling equipment
Additional information
| Weight | 2 kg |
|---|
Be the first to review “GPI FM Approved Remote Kit Assembly for All Q9 Meters”
You may also like…
- Chemical Flow Meters, Fluid Flow Meters, Refuelling & Liquid Transfer
GPI G2 Industrial PVDF Flow Meter
From £801.29 £961.55
Reviews
There are no reviews yet.