Description

Wavin Comfia UFHC6 Underfloor Heating Pack 6

Multi-Zone | Low Temperature | Sentio Smart Wireless Controls | 150mm Pipe Centres | 40m²–120m² | Screeded Floor

The Wavin Comfia UFHC6 Underfloor Heating Pack 6 is a complete multi-zone system designed for low-temperature heating applications, including air and ground source heat pumps operating below 55°C flow temperature.

Ideal for new builds and major renovations, this system is designed for installation within a screeded floor construction (screed not supplied) and provides efficient, even heat distribution across areas from 40m² up to 120m².

UFHC6 features the Wavin Sentio smart wireless control system, supplied with multiple wireless thermostats to enable independent temperature control across different rooms or zones. This makes it ideal for larger spaces, extensions or open-plan layouts where separate control is required.

Using 150mm pipe centres, the system delivers strong heat output suited to modern, well-insulated properties operating at lower flow temperatures.

Installation is carried out using a tacker system, where 16mm flexible polybutylene underfloor heating pipe is stapled directly into the insulation layer. Each pack is supplied with the correctly sized manifold and actuators to match the selected floor area and zoning requirements, along with the required pipe coil and system components needed for installation, including isolation valves, temperature gauges, air vents and Eurocone connectors.

Key Features

• Multi-zone underfloor heating system

• Sentio smart wireless control system (app controlled)

• Supplied with multiple wireless thermostats (zone control)

• Designed for low-temperature systems (below 55°C flow temperature)

• Ideal for heat pump installations

• Suitable for screeded floor constructions

• 150mm pipe centres for high heat output

• Supplied with correctly sized manifold and actuators

• 16mm flexible polybutylene underfloor heating pipe

Performance & Technical Information

• Heat Output: Up to 83 W/m² (based on tiled floor at 45°C flow temperature)

• Flow Temperature: Designed for systems operating below 55°C

• Pipe Centres: 150mm

• Floor Type: Screeded (not supplied)

• Control Type: Wireless (Sentio smart system)

• Includes: Temperature gauge, isolation valves, Eurocone connectors, actuators

• Energy Efficiency (ErP): N

• Supplier Part Number (example): UFHC6-40

• Brand: Wavin

If you’re installing underfloor heating in a larger home with a heat pump and want smart, zoned temperature control, the UFHC6 pack delivers professional-level performance in a ready-to-go kit.

The quantity of zones and thermostats per Pack is as follows:
– 40 m² pack = 2 zones and thermostats
– 60 m² pack = 3 zones and thermostats
– 80 m² pack = 4 zones and thermostats
– 100 m² pack = 5 zones and thermostats
– 120 m² pack = 6 zones and thermostats

Heat output guidance example: 

The above heat outputs are for guidance only, and calculated for systems installed in 75mm screed, with a flow temperature of 45ºC.

Wavin also provides system design and heat output calculations upon proof of purchase, offering additional reassurance for installers and specifiers.

Available in sizes from 40m² to 120m² – each with the correct number of thermostats and components.