Wavin Comfia UFHC8 Underfloor Heating Pack 8
FEATURES OF UFHC8 UNDERFLOOR HEATING PACK
- Single zone
- Area range: 12–70m²
- Dial thermostat
- Boiler or heat pump compatibility
Trade prices available for this product – contact us below.
Pack selection tool or bespoke design and quote?
From £954.55 £1,145.46
- Description
- Additional information
- Technical Downloads
- Reviews (0)
Description
Wavin Comfia UFHC8 Low Profile Underfloor Heating Pack 8
Single Zone | High & Low Temperature | Low Profile Retrofit | 150mm Pipe Centres | 12m²–70m² | 18mm System
The Wavin Comfia UFHC8 Underfloor Heating Pack 8 is a complete single-zone low profile underfloor heating system, designed for installation directly over existing floors where floor height build-up must be kept to a minimum.
With an ultra-slim 18mm system, UFHC8 is ideal for retrofit projects, renovations, or upgrades where traditional screeded systems are not suitable.
This pack is compatible with both high-temperature systems (such as gas or oil boilers operating above 55°C) and low-temperature systems including heat pumps, offering flexibility across a wide range of installations.
Using 150mm pipe centres, the system delivers high heat output while maintaining a low build-up height, making it suitable for a variety of floor finishes.
The system uses pre-routed low profile panels, supplied to match the selected floor area, allowing quick and consistent pipe installation using 12mm flexible polybutylene pipe.
Each pack is supplied with a correctly sized blended manifold with integrated pump and actuators, along with the required pipe coil and system components needed for installation, including isolation valves, temperature gauges, air vents, Eurocone connectors and a high limit thermostat.
Control is managed via a simple wired dial thermostat for straightforward single-zone operation.
Key Features
- Single-zone underfloor heating system
- Low profile 18mm retrofit solution
- Suitable for both high and low temperature systems
- Ideal for renovations and existing floor upgrades
- Pre-routed panels for fast, consistent installation
- 150mm pipe centres for high heat output
- Wired dial thermostat included
- Supplied with blended manifold, pump and actuators
- 12mm flexible polybutylene underfloor heating pipe
Performance & Technical Information
- Heat Output: Up to 145 W/m² (based on tiled floor at 50°C flow temperature)
- Pipe Centres: 150mm
- Floor Type: Low profile system panels (included)
- System Height: 18mm
- Control Type: Wired dial thermostat
- System Compatibility: Suitable for both high and low temperature systems
- Includes: High limit thermostat, temperature gauge, isolation valves, Eurocone connectors, actuators
- Energy Efficiency (ErP): N
- Brand: Wavin
Expected heat outputs are as follows:

The above heat outputs are for guidance only and calculated for systems with a flow temperature of 50ºC.
Wavin also provides system design and heat output calculations upon proof of purchase, offering additional reassurance for installers and specifiers.
Available in pack sizes from 12m² to 70m² — simply select the area that suits your project.
Additional information
| Weight | 2 kg |
|---|---|
| Area | 12m², 15m², 20m², 30m², 40m², 50m², 60m², 70m² |
| Heat Output | Up to 145 W/m² |
| Pipe Centres | 150mm |
| Floor Type | Low profile system panels (included) |
| System Height | 18mm |
| Control Type | Wired dial thermostat |
| System Compatibility | Suitable for both high and low temperature systems |
| Energy Efficiency (ErP) | N |
















Reviews
There are no reviews yet.